IBIZA LIGHT LED-FLOWER Bedienungsanleitung Seite 3

How To Control The Unit
There are three ways to operate the unit:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
A. Master/Slave operation
In master/slave mode you can link as many units together in a days-chain to perform the built-in pre-programmed
lighting shows triggered by music.
For Master/Slave mode please refer to the DMX settings below:
Master unit: when working at Auto-run or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
LED display as below:
DMX code setting: D001~D512
CH1
CH2
CH3
CH4
CH5
Manual setting mode:
A1 Mode
A2 Mode
A3 Mode
A4 Mode
S1 Mode
S2 Mode
S3 Mode
©Copyright LOTRONIC 2012
LED Dimmer（0~255）
Flash（0~255）
Motor gobo（0~255）
Motor mirror（0~255）
Auto DMX（11~200）
Sound DMX（201~255）
Auto setting
Auto setting(Not Flash)
Auto setting( Flash)
Auto setting(Cyclical changes)
Sound active setting
Sound active setting (Flash)
Sound active setting (Not Flash)
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Speed 1~9
Page 3