Cutting Blade; Assembly - Greencut GGT200L Betriebsanleitung

46

ASSEMBLY

SAFETY COVER AND AXLE PLATE
1. Turn the brushcutter upside down. Place the protective cover on top of the engine .
2. Secure the cover with 2 screws.
3. Place the shaft plate (7) on the shaft and secure it in place with the screw provided.
2
FLOWER PROTECTOR
1. Place the flower protector (8) on the motor housing.

CUTTING BLADE

1. Place the blade on the axle plate and pull it out to fit the mount.
2. To remove the blade, push it toward the centre of the spindle plate and slide it out.
1
3
2