Professional Product - Renson Healthbox II Gebrauchsanweisung

1 • 1. Professional product
The Healthbox II is a product for professional installers
®
The Healthbox II can only be switched on by RENSON
®
customers with the necessary support!
The installer must make sure that the ventilation ducts are properly connected to the unit and that the
dipswitches are configured correctly. He must also calculate the total power consumption and
calibrate the unit.
The calibration process is finished when All LEDs on the control valves turn green.
The system will then operate in C-mode for about 30 minutes.
Only then the professional installer can complete & fill in the protocol for operation.
ATTENTION:
The private customer cannot fill in the protocol himself. RENSON
accountable when the Healthbox
proper calibration. All warranty expires when the ventilation system is installed badly or when the
ventilation ducts are not connected and installed properly .
Remark regarding installation:
See instructions in the packaging when you wish to suspend the Healthbox
included cord.
EN
18
®
II is sold separately without proper support and without a
®
installers that sell the system and provide
Ventilation NV cannot be held
®
from the ceiling by the
®