C Leaning - SUHNER ABRASIVE LTB 6-350 Hook Originalbetriebsanleitung

against the flat side of the blade. Move the whetstone
back and forth.
V
ery shArP BlAde
4.1.5 g
reAsing the BlAde
Use only food grade (FDA approved) lubricants, e.g.
TURBO LUBE GREASE (art. no. 60000078), TURBO
LUBE SPRAY (art. no. 60000077).
To fill the grease cup, press in the button. Insert the grease
gun into the nipple on the grease cup, and press strongly
to charge it with grease. Stop when the button has moved
up. Press the grease button at regular intervals and after
cleaning and connecting the nose.
4.2 c
leAning
4.2.1 m
Achine
The compressed air motor must
be cleaned and disinfected regu-
larly with drinking water at ≥ 80 °C
in accordance with DIN 10516:2009-05, Table 3. No
chemical cleaning agents and no chemical disinfectants
may be used. Make sure particularly that meat and other
residue is removed at regular intervals.
V
ery shArP BlAde
4.2.2 n
ose And BlAde
The nose and the blade must be
cleaned and disinfected daily with
drinking water at ≥ 80 °C in ac-
cordance with DIN 10516:2009-05, table 3. Make sure
particularly that meat and other residue is removed regu-
larly. Dismantle the blade according to section 3.2.1 and
the depth gauge according to section 3.2.2.
!
Pull the pinion out of the head piece. Unscrew the grease
cup from the head piece.
Twist the hand piece to detach it from the grip unit. Clean
the parts thoroughly with a brush and detergent. Rinse
with water and let it dry. Do not use aggressive detergent!
To connect the nose, follow the above instructions in re-
verse order. After connecting, press the grease cup but-
ton two to three times.
!
23