Olympus PPO-EP03 Bedienungsanleitung Seite 27

3. Mounting the PPO-EP03 on the Case
This product should be used only with the appropriate Case. For further
details, please see the instruction manual of the Case.
EN
To prevent contamination or scratching of the lens, keep the front cap in
place when attaching or detaching the Lens Port.
If water droplets are adhered to the product, wipe them off and make sure
the product is dry.
Installation
Align the protrusion (1) of the Lens Port with the concave parts (2) on
the Case, press on the Lens Port as far as it will go, and turn the port ring
to lock.
Check that the Lens Port does not come off.
Removal
If water droplets etc. are adhered to the Case or the Lens Port, wipe them
off and check to ensure both items are dry.
Slide the slide lock of the port ring (3), and turn the port ring (4).
Then, remove the Lens Port.
For PT-EP14
4
3
1 2
EN 27