Olympus PPO-EP03 Bedienungsanleitung Seite 21

7 Please remove the O-ring when traveling by air. Otherwise air
pressure may make it impossible to remove the rear cap.
8 To ensure safe use of the product, carefully read the instruction
manuals of the camera and the Case to which the product is attached.
9 When attaching this product to the Case, make sure that foreign matter
is not trapped between the O-ring and the contact surface as this can
adversely affect the waterproofing and result in leakage occurring.
0 When attaching this product to the Case, be sure to follow the
attachment method set out in this manual, ensuring that the
instructions are followed in the correct order.
a Before detaching this product from the Case, dry all parts fully and
check that no moisture is adhered.
b When storing this product, always detach the product from the Case
and fit the front cap and rear cap.
c When the Lens Port is not to be used for a long time, remove the O-
ring from the groove to prevent deformation of the O-ring, apply a thin
coat of silicone grease, and store it in a clean plastic bag or the like.
EN
EN 21