Maestro MR904 Bedienungsanleitung Seite 5

- Children or pets should be supervised to ensure that they do not play with the
EN
appliance.
- Do not direct the air flow from the fan on sleeping people, especially on children
or pets.
- It is not recommended to stay directly under permanent air flow for a long time.
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT USE THE APPLIANCE
FOR ANYTHING OTHER THAN INTENDED USE.
- Do not use it for commercial purpose.
Actions in extreme situations
- If your device has fallen into water or water has penetrated it, immediately disconnect it
from the mains without contacting the device itself or the water.
- If there appears smoke, sparkling, strong smell of burning isolation, immediately stop
using the device, disconnect the device from the mains and apply to the nearest service
center.
Operation
Before startup
- Remove all wrap materials and film.
- Make sure that all the parts of appliance don't have damages.
Assembling fan Picture1 (page 2)
Unscrew the blade screw (2) from the motor by turning screw clockwise.
Unscrew the grill lock nut (4) from the shaft by turning nut counterclockwise.
Position rear grill (5) firmly to the shaft and insert the grill lock nut (4). Fasten by turning
the grill lock nut clockwise.
Push the blades (3) along motor shaft (6). Secure the blade with the blade screw (2) by
tightening counterclockwise.
Check that blades turn freely, without rubbing and contact with grill lock nut.
Position front grill (1) and lock its clamps.
Control and positioning
Fan speed control:
Make sure that the switch is set to "0" position, connect the plug of the core to the electric
socket.
To operate the fan, press one of the buttons on the control panel:
5