Herunterladen Inhalt Inhalt Diese Seite drucken

Keeping Your Shaver In Top Shape - Braun 190s-1 Handbuch

1 serie
Vorschau ausblenden Andere Handbücher für 190s-1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning
Regular cleaning ensures better shaving performance. Rinsing the shaver head
under running water after each shave is an easy and fast way to keep it clean (b):
Model 190s/cb only:
• Switch the shaver on and rinse the shaver head under hot running water until all
residues have been removed.
• You may use liquid soap without abrasive substances. Rinse off all foam and let
the shaver run for a few more seconds.
• Next, switch off the shaver, remove the shaver foil (2) and cutter block (3).
Then leave the disassembled shaving parts to dry.
• If you regularly clean the shaver under water, then once a week apply a drop of
light machine oil onto the long hair trimmer and shaver foil (d).
Model 170s only:
• After each shave, rinse the shaver head under hot running water until all
residues have been removed (b). You may use liquid soap without abrasive
substances. Rinse off all foam.
• Next, remove the shaver foil (2) and cutter block (3). Then leave the
disassembled shaving parts to dry.
Alternatively, you may clean the shaver using a brush (c):
• Switch off the shaver. Remove the shaver foil and tap it out on a flat surface.
• Using the brush, clean the cutter block and the inner area of the shaver head.
However, do not clean the shaver foil with the brush as this will damage the foil.

Keeping your shaver in top shape

About every four weeks, clean the cutter block with Braun cleaning agents.
Put a drop of light machine oil onto the long hair trimmer and the shaver foil (d).
Replacing the shaver foil and cutter block
To maintain 100% shaving performance, replace the shaver foil (2) and cutter
block (3) at least every 18 months or when worn. Change both parts at the same
time for a closer shave with less skin irritation.
(Shaver foil and cutter block: 10B)
Preserving the batteries (model 190s/cb only)
In order to maintain the optimum capacity of the rechargeable batteries, the
shaver has to be fully discharged (by shaving) every 6 months approximately.
Then recharge the shaver to full capacity.
12

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

190cb-1170s-1

Inhaltsverzeichnis