Configuring The Machine - Canon i-SENSYS LBP162dw Erste Schritte

Quick Setup
En

Configuring the Machine

Configuring the Initial Settings
of the Machine
N O T E
Parts and functions of the operation panel
P.132 "Start the Operation from the
Operation Panel"
1.
Language
Czech
Danish
Dutch
English
• Configure the initial settings, according to the
screen.
2.
Set the language and country/region.
3.
Set the time zone and current date/time.
4.
Configure the settings to prevent
unauthorized access.
• For the purpose of confirmation, enter the
same PIN twice.
8
Configure the settings in the following order.
Configuring the Method of
Connecting to a Computer
Before starting the configuration
• The machine cannot be connected to
both wired and wireless LANs at the same
time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if
necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
Use wireless LAN to
connect to network?
(Can config. later.)
Yes
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
1.
Make sure that the computer is connected to a
router properly.
2.
Check the network settings on the computer.
No