Guarantee And Service - Philips HD4678/60 Bedienungsanleitung

- Once every month for hard water areas (more than 18dH).
1 Fill the kettle with approx. 900ml water.
2 Set the temperature knob to black tea setting and switch on the kettle (Fig. 8).
3 After the kettle switches off, add white vinegar (8% acetic acid) to the 1.2-litre
level.
4 Leave the solution in the kettle overnight.
5 Empty the kettle and rinse the inside thoroughly.
6 Fill the kettle with fresh water and boil the water.
7 Empty the kettle and rinse it with fresh water again.
Repeat the procedure if there is still some scale in the kettle.
Tip: You can also use an appropriate descaler. In that case, follow the instructions on the
package of the descaler.
Replacement
You can purchase a new double-action scale filter (type number HD4983) at your
Philips dealer or at a Philips service centre.
If the kettle, the base or the mains cord of the appliance is damaged, take the base
or the kettle to a service centre authorised by Philips for repair or replacement of
the cord to avoid a hazard.
Environment
- Do not throw away the appliance with the normal household waste at the end
of its life, but hand it in at an official collection point for recycling. By doing this,
you help to preserve the environment (Fig. 9).

Guarantee and service

If you need service or information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Consumer Care Centre in your
country (you find its phone number in the worldwide guarantee leaflet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
3 4222.005.0132.1