Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Storing; Technical Data - MIA AMPLIFi 30 Handbuch

Akku hand- und bodensauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning and storing

Caution danger of electrical shock! Never immerse the appliance cord and plug into
water. The connector parts must not get wet. Contact of electrical parts with moisture
cause short circuit and damage. Let the unit cool down before cleaning and storing it.
Cleaning
Clean the dust container and the filter after each use.
Hold cleaner in vertical position with nozzle end pointing downward.
Press the release button and pull container gently out.
Remove the permanent filter (1). Remove the cover of the filter (2).
Empty the dust cover and the permanet filter. Do not clean wet, this
can damage the filter.
To reassemble the unit attach filter cover and the permanent filter into
the unit and fix firmly. Ensure that it fits exactly, otherwise the dust
can get into the inner of the appliance and cause damage.
Connect the container with the motor part again.
To avoid damage and scratches on the plastic
surface never use sharp edged or metallic objects
or sharp cleaning solvents to clean.
Do not use any thinner, benzene or other sharp
detergents or sharp edged objects to clean the unit.
To guarantee faultless operation regularly control if the air inlet and the
suction opening are not blocked by any objects, hair, dust or lint balls. This can avoid
reduced suvction power and overheating.
Storage
For storing and keeping the appliance always charged replace it into the wall mount
or the mobile charging station after each use and plug in.
The appliance, wall mount / mobile charging station should be positioned in a dry
place, not reachable for children.
For space saving storage in the mobile charging station you can fold the handle to
the backside entirely. Press the silver colour release button to fold the handle.
Protect the appliance from humidity and do not store the appliance near
a heating element. Plastic parts of the housing could melt.

Technical data

AC-DC adapter input: 230-240 V ~ 50 Hz;
AC-DC adapter output: 18V DC 200 mA;
AC-DC adapter: protection class II
Accus: Ni-MH 12V 1400 mAH
Inside of the unit are 10 NiMH rechargeable batteries (dispose as requested by disposal
regulations according to accumulator and battery disposal (see chapter "Disposal").
The appliance and the adapter are tested according to GS and are built according to CE
directives.
(1)
16
Release button
(2)
Storage in the mobile
charging station

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis