Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
1
Foldable handle for floor use
2
ON/OFF Switch (floor use)
3
Release button for the foldable handle
4
Release button for the hand vacuum cleaner
5
Housing (floor vacuum cleaner unit)
6
ON/OFF Switch for the hand vacuum cleaner
7
Control lamp (charging)
8
Permanent filter (in the dust box)
9
Charging station and wall mount
10 Electrical Turbo brush
11 Control lamp (operation)
12 Double ball joint for the turbo brush
Mounting before use
Unpack the appliance and remove all foils and the packing material completely.
Check the scope of delivery for completeness.
If the hand vacuum cleaner (motor unit) is not mounted attached it at the lower
holder at the housing. Take care that it is engaged firmly.
Unfold the handle (see figure to the right) until it is firmly engaged. To fold
the handle press the silver colour release button fort he foldable
handle (see figure under "Description" also).
Attach the electrical turbo brush by fixing it precisely and gently at the
connection tube of the floor vacuum cleaner unit (see the 3 figures
below also). Take special care with the plugs at the turbo brush to
avoid damage.
Connection tube
Plugs
Assembled turbo brush
13
12
11
Release button in the back
1
2
3
4
5
6
7
8
9
10
Werbung
Kapitel
Inhaltsverzeichnis
