Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PUB 500 B1 Originalbetriebsanleitung

GB IE
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
injury and fi re.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device
Caution!
Read the operating instruc-
tions.
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger
area.
Wear ear and eye pro-
tection!
20
Warning!
Risk of injury from the rotat-
ing tool! Keep hands and
feet away.
Do not expose the device
to the damp.
Attention! Pull out the mains
plug before performing
cleaning and maintenance
tasks and if the connection
cable is damaged.
Wear gloves!
Noise level specifi cation
L in dB
WA
Electrical appliances must
not be disposed of with the
domestic waste.
Protection class II
(Double insulation)
Direction of travel of brush
Push
Operation, brush support
Pull

Symbols in the manual

Warning symbols with
information on damage
and injury prevention.
Hazard symbol with
information on the pre-
vention of personal in-
jury caused by electric
shock.