Herunterladen Inhalt Inhalt Diese Seite drucken

Child Lock Function; High Temperature Alarm - AEG SCS81800F0 Benutzerinformation

Kühl-gefrierschrank
Vorschau ausblenden Andere Handbücher für SCS81800F0:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

The Timer shows the set value (30 minutes) for a few seconds.
2.
Press the Timer regulator button to change the Timer set value from 1 to 90 minutes.
3.
Press the OK button to confirm.
The Minute Minder indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Minute Minder indicator flashes and an audible alarm
sounds:
1.
Remove any drinks contained in the freezer compartment.
2.
Press OK button to switch off the sound and terminate the function.
It is possible to deactivate the function at any time during the countdown:
1.
Press the Mode button until the Minute Minder indicator flashes.
2.
Press the OK button to confirm.
3.
The Minute Minder indicator goes off.
It is possible to change the time during the countdown and at the end by pressing the Tem-
perature colder button and the Temperature warmer button.

Child Lock function

To lock the buttons from unintentional operation select the Child Lock function.
To switch on the function:
1.
Press the Mode button until the corresponding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the Child Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.

High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature indicators
• sounding of buzzer.
To reset the alarm:
1.
Press any button.
2.
The buzzer switches off.
3.
The freezer temperature indicator shows the highest temperature reached for a few
seconds. Then show again the set temperature.
4.
The alarm indicator continue to flash until the normal conditions are restored.
When the alarm has returned the alarm indicator goes off.
31
Control panel

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis