Bartscher 103.069 Bedienungsanleitung Seite 24

•
Several factors influence the time necessary to heat plates:
type and thickness of plates,
-
number of plates in the device,
-
temperature settings,
-
temperature of surroundings,
-
For this reason it is not possible to state an exact time for warming. Only during
use, taking into account the above-mentioned factors, can the user select proper
settings.
•
Plates may be removed from the device as needed.
•
Prior to removing plates it is necessary to turn the device off using the switch located
at the front of the device.
•
If the device is to be available to guests it is important to ensure that the
temperature regulator is not accessible to unauthorized persons.
WARNING! Danger of burns!
When in use certain parts of the device get very hot. To avoid burns it is
necessary to be cautious when touching such surfaces.
To open the device it is necessary to use the handle on the rotating glass door.
•
To fill the device with plates it is necessary to turn it off first. Prior to filling the device
check that the plates are dry and clean. If any water gets on the surface, wipe it off
immediately.
WARNING! Danger of injury!
Never turn the device on if there are liquids on or inside the device.
To avoid electrocution, fire, or damage to the device, do not touch it in such an
event but disconnect it by removing the plug from its socket!
•
Disconnect the device from the socket (remove the plug!) if there are no plates
inside or after finishing use.
- 24 -