Connecting To External Devices; Method 1 Optical : Connecting An External Digital Audio Component; Method 2 Aux In : Connecting An External Analogue Component - Samsung HT-ES6200 Bedienungsanleitung

Connections

Connecting to External Devices

To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD
Red
R
White
W

Method 1 OPTICAL : Connecting an External Digital Audio Component

To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.

Method 2 AUX IN : Connecting an External Analogue Component

Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analogue component.  Select the AUX mode.
• Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
20
|
English
HT-ES6200_XU_0314.indd 20 HT-ES6200_XU_0314.indd 20
D. IN AUX R. IPOD
(Cable not supplied.)
Method 1
External Devices
FM
OPTICAL OUT AUDIO OUT
(Cable not supplied.)
Method 2
2012-03-14 오후 4:46:39 2012-03-14 오후 4:46:39