ZANKER KHV3321N Benutzerinformation Seite 20

• , 1 - 2 6 hours
• 3 - 4 5 hours
• 5 4 hours
• 6 - 9 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
Activating and deactivating the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
Use sensor field:
To activate the outer ring: touch the sensor field. The
indicator comes on.
To deactivate the outer ring: touch the sensor field
until the indicator goes out.
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
First set the cooking zone then set the function. You
can set the heat setting before or after you set the
function.
To set the cooking zone: touch
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
of the timer to set the time (00 - 99 minutes).
or
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch . The remaining time counts back to
00. The indicator of the cooking zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
20
to
and at the
again and again
.
Minute Minder
You can use this function as a Minute Minder when the
hob is activated and the cooking zones do not operate
(the heat setting display shows
To activate the function: touch
of the timer to set the time. When the time comes to an
end, the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
STOP+GO
This function sets all cooking zones that operate to the
lowest heat setting.
When the function operates, you cannot change the
heat setting.
The function does not stop the timer functions.
To activate the function: touch
To deactivate the function: touch
heat setting comes on.
Lock
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the heat
setting.
Set the heat setting first.
To activate the function: touch
seconds. The Timer stays on.
To deactivate the function: touch
heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
The Child Safety Device
This function prevents an accidental operation of the
hob.
To activate the function: activate the hob with
not set the heat setting. Touch
comes on. Deactivate the hob with
To deactivate the function: activate the hob with
Do not set the heat setting. Touch
comes on. Deactivate the hob with
).
. Touch or
.
. comes on.
. The previous
. comes on for 4
. The previous
. Do
for 4 seconds.
.
for 4 seconds.
.
.