Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

ELECTRICAL INSTALLATION
Evaluation of the correct high frequency polarity
After the loudspeakers have been mounted in the automobile, they are connected with the
included crossover. At first the crossover should be placed in an easily accessible position,
preferably directly reachable from the driver's seat. To recognize the correct polarity as a
rule the operation of one channel (either left or right) is sufficient.
The correct polarity of the tweeter can be evaluated most simply from the volume.
Adjust the volume control so that the music can be clearly heard in its full band width (high,
mid and deep range).
Play a segment of music (about 20-30 seconds) and pay close attention to the
reproduction. Stop the music and reverse the poles of the tweeter on the crossover by
exchanging the connecting cables (plus / minus). Listen to the music segment again and
try to answer the question which of both connections was louder. Repeat the experiment
until you are completely sure.
The louder reproduction shows the correct polarity of the system!
After the polarity has been decided upon tweeter level adjustment should be reconsidered.
Tips:
* In the dark or with closed eyes the sound differences are usually more audible.
* Use a complex instrumental music segment with several acoustic instruments for the
evaluation.
ABBILDUNGEN / FIGURES
Abbildung 1
POW 100 Compression
Figure 1
Blechmutter
Tinnerman Nut
Einbau Mittel/Tieftöner
Flush mount of Mid/Woofer
Blechschraube
Self-Threading Screw
Abbrechohren-
wenn nur Platz für
2 oder 3 Anschraub-
punkte ist.
Break off Ears-
if there is space for
2 or 3 mounting
holes only.
9
ABBILDUNGEN / FIGURES
Abbildung 1
POW 130 Compression
Figure 1
Blechmutter
Tinnerman Nut
Blechschraube
Self-Threading Screw
Abbildung 1
POW 160 Compression
Figure 1
POW 172 Compression
Blechmutter
Tinnerman Nut
Blechschraube
Self-Threading Screw
Einbau Mittel/Tieftöner
Flush mount of Mid/Woofer
Ring und Gitter
(Zubehör - nicht enthalten)
Ring and grille
(optional - not included)
Einbau Mittel/Tieftöner
Flush mount of Mid/Woofer
Ring und Gitter
(Zubehör - nicht enthalten)
Ring and grille
(optional - not included)
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis