Connecting Headphones; Line Out Output; Line In Input; Pedal Functions - Hemingway DP701 Bedienungsanleitung

4. Connecting headphones

Two pairs of headphones can be connected to the
Digital Piano. The headphone jacks are located to
the left on the front panel. The internal loudspeaker
system will switch off automatically when head-
phones are connected. Use the MASTER VOLUME
fader to adjust the headphone volume level.

5. LINE OUT Output

The Line Out jack can be used to deliver the out-
put of the piano to a keyboard amplifier, stereo
sound system, mixing console or recording device.
The Line Out level is not affected by the MASTER
VOLUME fader setting.

6. LINE IN Input

Through the LINE IN Input jack an external sound
source, for example a CD-Player, may be connected
to the piano. This makes it possible to playalong to
the music played by the CD-Player.

7. Pedal functions

By using the pedals on the Digital Piano you can
produce the same tonal effects as on an acoustic
piano. Please connect the pedal unit cable to the
PEDAL jack on the rear panel of the piano.
The sustain pedal (right) functions as a damper pe-
dal controlling sustain. Press the pedal to sustain
notes after the keys are released.
The sostenuto pedal (middle) will sustain notes
played when the pedal is pressed down. Notes
played afterwards will not be sustained (This is also known as "selective sustain").
The soft pedal (left) controls tone volume. Press down the pedal to decrease the volume. Release the
pedal to return to normal volume.
Part 3: Functions
25