Laserworld CS-2000RGB FX Bedienungsanleitung Seite 10

DIP-Switches (Number)
4 5 6 7
0 0 0 0
1 0 0 0
0 0 1 0
0 0 0 1
0 0 0 0
Your device runs in DMX mode if '10' is switched off:
•
The DMX mode only works when a DMX controller is connected to the
laser. Use the switches 1 - 9 to set the DMX address of the laser. Each
switch represents a number:
Switch 1 2
Number 1 2
The laser uses 13 DMX channels, so make sure that the next device uses
an address that doesn't overlap with this range.
EN page 8 / 11
8
0 Multi color
0 Single color
0 Burst grating
0 Radial grating
1 Line grating
3 4 5
4 8 16
Effects
6 7 8
32 64 128
Manual: CS-2000RGB FX
9 10
256 Mode Switch