Samsung HT-FS9200 Bedienungsanleitung Seite 57

Symptom
The AllShare connection
between the product and
PC is unstable.
BD-LIVE
I cannot connect to the
BD-LIVE server.
When using the BD-LIVE
service, an error occurs.
| NOTES |
\
When the factory default settings are restored, all stored user BD data will be deleted.
Hereby, Samsung Electronics, declares that this Home Cinema System is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search
Product Support and enter the model name.
This equipment may be operated in all EU countries.
This equipment may only be used indoors.
• IP address under the same subnetwork should be unique, otherwise IP collision can
results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
• Test whether the network connection is active by using the Network Status
function.
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 51)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the latest firmware.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 51)
Check/Remedy
57
|
English