Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the bearings or the complete hub. If the motor fails, it must be repaired by an
authorized dealer.
(4) Power on the bicycle when checking the electrical circuit for continuity. Check
whether all connectors are firmly plugged in and all fuses are working normally.
In particular, check whether the output of the battery terminals is optimal and
whether the wiring harness is properly connected to the battery. Solve any issues
in a timely manner.
(5) Before riding, check whether the battery level is sufficient for the expected
mileage. If the battery level is insufficient, please supplement by pedaling the
bicycle so as to avoid battery undervoltage.
(6) Before riding, check whether the motor works properly. Start the motor and
adjust its speed to visually inspect and listen to the motor. If there is any unusual
behavior, it should be repaired in a timely manner.
(7) Before riding, check whether the lights and bell are working properly,
especially when riding at night. The front light is supposed to be bright and its
light beam should fall in a range of 5–10 meters in front of the bicycle. The bell is
supposed to ring loudly, and the dashboard should work normally.
(8) Before riding, check whether all parts are properly fastened. For example,
the handle bar, handle post, saddle, seat post, front wheel, rear wheel, crank
axle, locknut, and pedals. If any part is loose or lost, it should be tightened or
replaced immediately. The recommended torque specifications are: Handle
post 18–20 N·m, saddle18–25 N·m, Handle bar 6–8 N·m, Rear wheel 35–45 N·m,
Crank axle nut 35–50 N·m, Pedals 35–45 N·m.
•
As with other sports, bicycling involves risk of personal injury and damage of the
bike. By choosing to ride a bike, you assume the responsibility for that risk, so
you need to know and to practice the rules of safe and responsible riding and of
proper use and maintenance. Proper use and maintenance of your bike reduces
risk of injury.
•
The combination of the ⚠ safety alert symbol and the word WARNING indicates
a potentially hazardous situation which, if not avoided, could result in serious
injury or death.
•
The combination of the ⚠ safety alert symbol and the word CAUTION indicates
a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, or is an alert against unsafe practices.
•
The word CAUTION used without the safety alert symbol indicates a situation
which, if not avoided, could result in serious damage to the bike or the voiding
of your warranty.
•
Many of the warnings and precautions say "you may lose control and fall". Since
any fall can result in serious injury or even death, these warning of possible
injury or death will not always be mentioned.
•
Please read the warning message on the handle bar: Before each ride, make
sure the handle post hinge is properly tightened and safely secured.
10
Werbung
Inhaltsverzeichnis
