Before Use - Toledo TCD-1200K Gebrauchsanweisung

EXPLANATION OF SAFETY MARKINGS
TYPE
ART.NR
V
818810 TCD-960K 9,6
818825 TCD-1200K 12
818845 TCD-1440K 14,4
818850 TCD-1440K2 14,4
818860 TCD-1680K 16,8
818870 TCD-1800K 18
818875 TCD-1800K2 18
GB English
Product: Toledo Cordless drill
Toledo, Genemuiden, The Netherlands
Sound pressure level 75 dB(A)
Vibration ( - a
) < 2,5 m/s
w
Cordless drills are supplied with
batteries. If the batteries can no
Ni-Cd Ni-Cd
longer be charged, do not throw
them away but hand them in to the
domestic chemical waste depot.
SERIAL NUMBER
The serial number on the machine consists of the fol-
lowing elements..
Serial nr.
ORDER NUMBER/YEAR OF COSTRUCTION
CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE CORDLESS DRILL!
SPECIAL SAFETY RULES
1. Check that:
- the voltage of the charger corresponds to the
mains voltage. Chargers with an indicated vol-
tage of 220V are also suitable for 230V;
- the cord and the mains plug are in good condi-
tion: not damaged or frayed;
- the secondary voltage of the charger corres-
ponds to the charging voltage of the battery
charger and the supply voltage of the battery;
- the voltage of the battery corresponds to the
supply voltage of the rechargeable drill.
2
CHARGER
1 '
TYPE
T/MIN
0 - 550 TCDL-960 230V~ 50 Hz
0 - 550 TCDL-1200 230V~ 50 Hz
0 - 550 TCDL-1440 230V~ 50 Hz
0 - 550 TCDL-1440 230V~ 50 Hz
0 - 900 TCDL-1680 230V~ 50 Hz
0 - 900 TCDL-1800 230V~ 50 Hz
0 - 900 TCDL-1800 230V~ 50 Hz
2. Never use a long extension cord with the charger.
3. Immediately switch off the machine when the drill
bit gets stuck during drilling.
4. Always make sure the maximum allowed speed for
accessories is suitable for the speed of the drill.
5. Never tie the chuck key to the drill with a piece of
rope or something simular, but store the key in the
special holder on the top of the machine.
6. Never use the battery charger to charge other
batteries than the battery provided with the drill.
2
7. Never attempt to open the housing of the battery
pack. Do not incinerate the battery pack as this can
release very dangerous chemicals or cause the bat-
tery pack to explode.
8. Do not use the battery charger or the adapter in
damp or wet conditions.
WHEN USING THE MACHINE:
1. Always switch off the machine before moving it
downward alongside your body.
! Never use the reverse switch during drilling!
IMMEDIATELY SWITCH OFF THE MACHI-
NE WHEN:
1. There is a failure in the battery or the battery con-
nections.
2. The switch is defective.
3. Insulation material starts to smoke or smell.

BEFORE USE

1. Use only sharp drill bits that are right for the job:
METAL HSS:
WOOD HSS:
2. Drill or screwdriver bits can easily be mounted in
the drill chuck without a chuck key. Firmly tighten
the drill chuck by hand.
3. Place the battery in the grip handle of the rechar-
geable drill. There is only one way to install the
battery correctly.
AVAILABLE SPARE PARTS FOR TCD-1440K/TCD-1440K2
REF.NR. DESCRIPTION
2 KEYLESS CHUCK
4 SWITCH
7 BATTERY TCDB-1440
- CHARGER TCDL-3, 14,4 V
- ADAPTOR TCDL-1440
REF.NR. DESCRIPTION
2 KEYLESS CHUCK
4 SWITCH
7 BATTERY 16,8 V, 1200 mA
- CHARGER TCDL-3, 16,8 V
- ADAPTOR TCDL-1680, 3 - 5 hr
AVAILABLE SPARE PARTS FOR TCD-1800K/TCD1800K2
REF.NR. DESCRIPTION
2 KEYLESS CHUCK
4 SWITCH
7 BATTERY 18 V, 1200 mA
- CHARGER TCDL-3, 18 V
- ADAPTOR TCDL-1800, 3 - 5 hr
Toledo
Toledo
AVAILABLE SPARE PARTS FOR TCD-1680K
TOLEDO NR.
406190
406189
406181
406182
406183
TOLEDO NR.
406190
406189
406174
406175
406176
TOLEDO NR.
406190
406189
406177
406178
406179
35