Declaration Of Conformity; Maintenance / Service - Skil F0157440 Serie Originalbetriebsanleitung

! be aware that the working of the pressure control
feature is not guaranteed when sanding at lower
speed control settings (1-6)
the tool
! be aware of the sudden impact when the tool is
switched on
! before switching off the tool, you should lift it
from the workpiece
2
- press knob G 2
- release the trigger
releasing it
7 (7460
- with wheel 2
testing out on spare material
! while working, always hold the tool at the
grey-coloured grip area(s)
it in circles or in a cross pattern
! do not apply too much pressure on the tool; let
the sanding surface do the work for you
marks
pressure applied to the tool
APPLICATION ADVICE
! always test out first on a piece of scrap material

MAINTENANCE / SERVICE

slots K 2
! disconnect the plug before cleaning
power tools
2 and then
8
2
- send the tool undismantled
ENVIRONMENT
Do not dispose of electric tools, accessories and
packaging together with household waste material
0
disposing occurs

DECLARATION OF CONFORMITY

2011/65/EU
Technical file at
1Öêàáå"îÖå"ÚÛê",ççÜÚÛå
3èÛêÖìàçåë"ﾏ")åÝàåÛÛêàåÝ
7/-0")íêçèÛ"&: "♂"∞♀"&("&êÛÚÖ "20
09.12.2013
NOISE/VIBRATION
2
9 can
increase
reduce
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
7
3ãÖÜ"(àáâÝêÖÖÜ
%èèêçîÖã"1ÖåÖÝÛê