During Use; After Use; Before Use - Skil F0157440 Serie Originalbetriebsanleitung

Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired

before use.

maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR SANDERS
GENERAL
Do not work materials containing asbestos (asbestos
making any adjustment or changing any accessory
ACCESSORIES
when original accessories are used
sanding discs
BEFORE USE
ear protection
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when
connectable
wear a dust mask and
Secure the workpiece (a workpiece clamped with
dustbox and keep other persons and combustible

DURING USE

AFTER USE

standstill
USE
! replace damaged backing pads immediately
! unplug tool before removing/mounting backing
pads
! the dust suction requires the use of perforated
sanding discs
4
hold it in that position while pulling dustbox D
backwards
place
! do not use dustbox when sanding metal
5 (7450/7460)
tool while working (too much pressure reduces the
- red light 4 turns on when pressure is too high
! the pressure control feature only starts working
properly after the tool has run for approximately
one minute
6