Installing The Ladder - iKAMPER X-Cover 2.0 Bedienungsanleitung

Installing ❶
the
Ladder
❷
❸
❹ 
20
 T he main panel and extension panel should be horizontal, with a small gap between
the two panels (the extension panel should be lifted up slightly higherthan the main
panel in order to not overextend the hinges).
The ladder should form a 70° angle with the ground.
 T he ladder height can be adjusted by pressing the two locking buttons. Repeat for each
section from top to bottom until the ladder is at the desired height.
W hen adjusting the height of the ladder, make sure that each section is securely locked.
70°