Inhaltsverzeichnis
Werbung
Levenhuk Wezzer BASE L70 Thermometer
EN
with projector and clock
The kit includes: base station, USB cable, user manual, and warranty.
Caution! Please remember that mains voltage in most European countries is 220—240V. If you want to use your device
in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.
Getting started
•
Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to the AC power
supply; or
•
Open the battery compartment cover (6) and insert 2 batteries according to the correct polarity. Close the cover.
NOTE! It is recommended to use an adapter for the continuous operation of the base station, although battery power
is also possible.
Time setting
Press the TIME button. The digits that are to be set are flashing. Press UP or DOWN to change the value, and then press
TIME to continue.
The setting order: 12/24h > Hours > Minutes > Date > Month > Year.
Finally, press the TIME button to save the settings and exit.
Alarm setting
Press the ALM1 button. The digits that are to be set are flashing. Press and hold the ALARM button in order to enter the
settings. Press UP or DOWN to change the value, and then press the ALARM button in order to confirm the settings.
The setting order: AL1 hours > AL1 minutes > AL2 hours > AL2 minutes.
Snooze function: Press SNZ button to activate the snooze function. The alarm will sound again in 5 minutes.
Press any button to silence the alarm until the set alarm time is reached again.
Temperature setting
Press the UP button to switch between °C and °F.
When the temperature and humidity values are outside the operating range, the LCD displays the "LL" symbol (value
below the operating range) or the "HH" symbol (value above the operating range).
Projection and backlight setting
•
Press the ROTATE button to change the projection degree (0° > 90° > 180° > 360°).
•
Press the LIGHT button to choose the brightness (3 levels available).
NOTE! If you use batteries, the backlight will light up for about 8 seconds.
Specifications
Air humidity, units of measurement
Operating humidity range
Temperature, units of measurement
Operating temperature range (indoors)
Time format
Screen
Power supply
USB cable
Dimensions
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.
Care and maintenance
•
Take the necessary precautions when using the device with children or others who have not read or who do not fully
understand these instructions.
•
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please
contact your local specialized service center.
•
Protect the device from sudden impact and excessive mechanical force.
•
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire,
and other sources of high temperatures.
•
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
•
Only use accessories and spare parts for this device that comply with the technical specifications.
•
Check this device, and its cables and connections for any possible damage before use.
•
Never attempt to operate a damaged device, or a device with damaged electrical parts! Damaged parts must be
replaced immediately by an authorized service agent.
•
If a part of the device or battery is swallowed, seek medical attention immediately.
•
Children should use the device under adult supervision only.
% (RH)
20... 95%
°F, °C
–10... +50°C (+14... 122°F)
24 hours, 12 hours
monochrome, with an LED backlight
AC/DC adapter 5V 1000mA (not included), 2 ААА batteries (not included)
1.5m (4.9ft.), included
151x42x94 mm (6x1.7x3.7in.)
6
Werbung
Inhaltsverzeichnis
