What's Next - Stages cycling BIKE Montageanleitung

• Apply grease to the pedal threads before installing, and if required by the pedal manufacturer, use pedal wash-
ers. Pedal extenders are not recommended.
• Follow installation instructions carefully, as the left pedal is reverse threaded. Do not force pedal threads, as
irreparable damage may occur to the crank arm.
• Check pedal manufacturer's instructions for correct torque specification.
Configuring the bike
Before you can begin riding the Stages Bike, you must first install the Stages Cycling app to connect to and con-
figure the bike.
Stages Cycling app
If you do not yet have the Stages Cycling app installed on your mobile device, please download and install it now.
The app is a crucial requirement for bike configuration, including firmware updates and necessary bike settings.
If you do not yet have a Stages Cycling account, create one now within the app.
Download Stages Cycling app:
Pre-configuration check list
Once you have the app installed, check these three things before moving on towards configuring your bike:
• Make sure the Stages Bike has power and all wiring connections are plugged in. See step #11 of the assembly
instructions to confirm bike has power by testing the brake function.
• Make sure the battery tabs are removed from both power meters.
• Spin the cranks to wake up the power meters.
Next, navigate to the Sensors page of the Stages Cycling app. The app will walk you through setting up the bike:
1. Tap on StagesBike SB20 to connect your bike, then select your bike from the list.
2. Once it connects, press Continue; the Stages Cycling app will update and verify the firmware. Press Done.
3. Tap on the Power meters tab to configure your crank length.
4. Tap on Setups to configure your virtual setups.

What's next

Now that you've completed assembly and set up, your Stages Bike is ready to set up bike fit, connect to devices,
and more. Our online StagesBike SB20 user guide and video tutorials will guide you through the next steps.
manuals.stagescycling.com:
Contacting customer service
If you have questions, or if parts are damaged or missing, please contact customer service at
support@stagesbike.com, or call USA (+1) 800-778-7218.
For videos, frequently asked questions, or other general information, go to:
support.stagesbike.com
The Stages Bike and Stages Power meter devices may be protected by USA or foreign patents or patents pending.
This document may contain trademarks or registered trademarks of Foundation Fitness LLC as represented by the use of ™ and
® respectively.
ANT+™ is a trademark of Dynastream Innovations Inc.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc.
StagesBike SB20 videos:
11