auna Amp VT Bedienungsanleitung Seite 12

EN
12
Back
1 2 3
1 AUX Input
Connect your AUX signal here.
SUB Output
2
Connect this output to the LINE Input of another active subwoofer.
3 Optical Input
Connect your optical signal here.
4 OPTICAL/COAXIAL Input Switch
Set this switch to corresponding position to select optical or coaxial
input mode.
5 COAXIAL Input
Connect your coaxial signal here.
6 Main Speaker Outputs
Connect your main speakers here.
BT OPERATION
To play BT signal, enable the BT function on a BT device like cell phone and
set the amplifier to BT input mode and then search for available BT devices
nearby on cell phone. The BT name of the speaker is "Amp VT". Pair and
connect. There is no pairing code.
Note: The Amp VT is only discoverable when input is set to BT.
4 5