Using Your Cleaner - Hoover HP220PAR 011 Bedienungsanleitung

GETTING TO KNOW YOUR CLEANER
A. Dust Bin Release Button
B. On / Off / Power Control Button
C. Power Control Silder
D. Exhaust Filter Cover Release Latch
E. Exhaust filter cover
F. Cord Reel Button
G. Dust Bin handle
H. Dust Bin Lid
I. Dust Bin
J. Cleaner Main Body
K. Hose end
L. Hose
M. Hose Handle
N. Suction Regulator
O. Telescopic Tube
P. Telescopic Tube Adjuster
Q. Carpet and Floor Nozzle (GP)**
R. Floor Type Selector Pedal
S. Exhaust Filter
T. Dust Bin flap Release Button
U. Separation System
V. Pre-motor filter
W. 2 in 1 Accessory
X. Pet Hair Remover Mini Turbo Nozzle*
Y. Allergen Remover Mini Turbo Nozzle*
Z. Parquet Nozzle*
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it locks into position. To
release: rotate the hose end and pull. [1]
2. Connect the hose handle to the end of the extension tube upper [2], or accessories
if required.
3. Connect the extension tube lower to the carpet and floor nozzle** [3], or accessories
if required.
*Certain Models Only ** Certain models only, nozzles may vary according to model

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [4]
2. Adjust the length of the telescopic tube by moving the telescopic tube adjuster up
and raise or lower the hose handle to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle**. Press the pedal on the nozzle [6] to select the ideal
cleaning mode for the floor type.
Hard Floor: The brushes are lowered to protect the floor.
Carpet: With lifted brushes for the deepest clean.
Switch the cleaner on by pressing the On/Off button on the cleaner main body. [7]
4.
Variable Power control: Adjust the power level by adjusting the power control
5.
slider*. [9]
6. Suction Regulator: Adjust the suction by opening or closing the air valve on the
handle. [8]
7. Switch off the cleaner at the end of use by pressing the On/Off button. Unplug and
press the cord reel button to wind the power cord back into the cleaner. [10]
8. Parking and Storage - The tube can be parked for temporary storage while in use, or
in the storage position when not in use. [11]
ACCESSORIES
To obtain the best performance and efficiency it is recommended that the correct nozzles
are used for the main cleaning operations. These nozzles are indicated in the diagrams
by the letters GP, HF or CA.
A nozzle type GP can be used to clean both carpet and hard floor.
A nozzle type HF is suitable for use only on hard floor.
A nozzle of type CA is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
All accessories can be fitted to the end of the handle or the end of the telescopic tube.
2 in 1 Tool combines several functions into one tool:
Crevice Tool – For corners and hard to reach areas.
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet
hairs removal.
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen
removal.
2
GB