PATONA Premium Serie Bedienungsanleitung Seite 12

5. If you now press the „CH/GRP" button a second time while the display is flashing, you will exit
the setting mode and the current menu.
Note: If you do nothing while the display is flashing, the setting mode will automatically end after 10
seconds.
6.4. Switching on/off with the remote control
1. Switch on the remote control.
2. Press the „ON/OFF" button (product overview FB no. 5).
3. Press the „ON/OFF" button again, the PATONA Premium Photo / Video Soft Light 3.0 should
now switch on or off.
6.5. Adjusting the brightness with the remote control
1. Switch on the remote control.
2. Press the setting key „+" or „-" to change the brightness. The maximum value is 100 %, the mini-
mum value is 1 %.
Note: If you keep the setting key „+" or „-" pressed longer, the values change in 5 % steps.
6.6. Setting the colour temperature with the remote control
1. Switch on the remote control.
2. Press the selection/setting key „SET" on the remote control. The current colour temperature
value should now flash continuously on the display. Press the setting key „+" or „-" to increase or
decrease the colour temperature. You can change the value by 100 K at a time. The maximum
value for the colour temperature is 8500 K, the minimum value is 2500 K.
Note: If you keep the setting key „+" or „-" pressed longer, the value changes in 200 K steps.
7. Technical data
Dimensions
Input voltage
Weight
Storage temperatur
Max. Humidity
Max. Ambient temperature
Number of LEDs
Power supply via rechargeable battery
Power supply via mains adapter
Max. Illuminance
Colour rendering index
Colour temperature
Power
Luminous flux
L 376 mm, H 266 mm, W 25 mm
7.4 – 16.8 V
1170 g
-10 °C – 50 °C
20 % – 90 %
0 °C – 40 °C
144 pieces up to 8500 K
144 pieces up to 2500 K
up to 2 batteries of the NP-F series
2.5 inch DC plug (15 V 3 A max.)
1000 lx / 1 m (± 200 lx)
CRI > 95
2500 K up to 8500 K (± 200 K)
max. 40 W
2600 lm ± (200 lm)
13