TCL Sweeva 6000 Bedienungsanleitung Seite 30

EN
Voice Prompt
The machine is tilted. Please
place the machine on a level
floor and restart it.
The along-the-wall sensor is
blocked. Please wipe it.
The cliff sensor is blocked.
Please wipe it.
The laser sensor is blocked.
Please wipe it.
A forbidden zone is detected.
Please move the machine to a
new position and restart it.
The battery is too low, and the
system will shut down auto-
matically.
Please clean and replace the
dust bag in the bucket.
The dust bag is not installed.
Please install the dust bag
before starting dust collection.
The dust bag has been taken
out, so dust collection is sus-
pended.
Please put back the dust box.
• The machine is tilted at the time of startup. Please place the machine on a level floor and
restart it.
• The along-the-wall sensor is blocked. Please wipe it.
• The cliff sensor is blocked. Please wipe it.
• The laser ranging sensor is blocked. Please clear the blockage. Reflective environments, such
as open space and metal mirrors, will also affect the normal operation of the laser ranging
sensor. So please move the machine to a new position and restart it.
• The machine is too close to the forbidden zone at the time of startup. Please move the
machine to a new position and restart it.
• Put the machine back into the charging base to charge.
• Please replace the dust bag with a new one.
• Please install the dust bag correctly.
• Please put back the dust bag.
• Please put back the dust box and filter, and confirm that the filter and dust box are installed
in place, and then start cleaning again.
2 6
Solution