General Safety Rules - SCOPREGA GE 900 Anleitung

M A N U A L O F
SAVE THIS INSTRUCTIONS MANUAL FOR REFERENCE
2. FOREWORD
Dear customer,
congratulations on choosing Scoprega.
We design and manufacture products of the highest quality to meet the needs
of our customers. Scoprega offers the highest quality in service as well. Our
specialised departments provide support and instructions when needed, as well
as comprehensive technical service.
We thank you for your trust.
WARNING
Read these instructions before using the inflator. Failure to follow all the instructions listed
below may result in damage to the product and/or cause serious injury to persons.
3. PRELIMINARY WARNINGS
1. Comply with all instructions in this document.
2. Keep these instructions.
3. Do not obstruct the vents (items 2 and 3 in figures 1 and 2) during inflation and deflation.
4. Always protect the power cable.
5. Do not open the inflator. Refer all servicing to qualified service personnel authorised by Scoprega.
Servicing is required when the device is damaged or not working in any way.
6. Do not tamper with the product. Opening the inflator will void its warranty.
7. Provide suitable ventilation.
8. Avoid placing objects near the product during operation.
9. Keep this product out of the reach of children.
10. The operating inflator produces vibrations: therefore, we recommend you to use it on the floor, so
as to avoid accidental falls.
DO NOT POWER THE INFLATOR WITH A
VOLTAGE HIGHER THAN THE RATED ONE.

4. GENERAL SAFETY RULES

1. ALWAYS TAKE INTO ACCOUNT THE WORKING ENVIRONMENT.
Do not expose the inflator to rain. Do not use in the presence of flammable liquids or gases.
2. AVOID UNINTENTIONAL STARTING.
Do not start the inflator with the inlet in contact with dust or water.
3. PAY ATTENTION.
Pay attention to what you are doing. Use common sense.
10
I N S T R U C T I O N S
4. CHECK THAT THERE ARE NO DAMAGED PARTS.
Before using the inflator, carefully check its outer sides and components.
5. DO NOT OPERATE
portable inflators near flammable liquids or in gaseous or explosive
atmospheres. The inflator motors produce sparks that can release fumes.
6. DO NOT INHALE!
The compressed air coming from the inflator is not clean. Never inhale air from your inflator.
7. WARNING! RISK OF EXPLOSION.
Inflate the unit only complying with the manufacturer's recommendations. Exceeding the pressure
rating could cause the inflator to explode, resulting in personal injury.
8. NEVER LEAVE THE DEVICE UNATTENDED.
Overinflation could result in serious injury and property damage.
9. WARNING! RISK OF UNSAFE OPERATION.
Do not modify or attempt to repair the unit. Do not drill into or make any modifications to the inflator
or its accessories. Any modification to the product will void its warranty.
10. Never carry the inflator by the flexible hose or power cable.
5. INTRODUCTION
GE 900 and GE 900 ARS are electric inflators designed for inflation and deflation of inflatable
products of a wide range of sizes and to be used for many applications. Maximum operating pressure
is 200 mbar, with a flow rate of 1700 l/min. They operate at a very reduced noise level (max 85 dB).
GE 900 A.R.S. includes a simple and easy-to-use digital display, which allows setting minimum and
maximum pressure for the inflatable unit.
6. TECHNICAL SPECIFICATIONS
FLOW RATE
ITEM CODE
(L / minute)
GE 900 K6131600 1700
GE 900 ARS
K6131630 1700
MAX.
MAXIMUM
PRESSURE
FUNCTIONS
POWER
(mbar)
INFLATION /
200 (2.9 PSI)
700 W
DEFLATION
INFLATION /
700 W 200 (2.9 PSI)
DEFLATION
11