KLAUE ABNEHMEN UND SCHAUFEL ANBRINGEN /
1. Schalten Sie die Fernsteuerung ein und ziehen Sie den Pin über CH10 ein.
Turn on the remote-control, shrink the pin.
2. Heben Sie die Klaue an und entfernen Sie sie.
Lift up and remove the claw
3. Schalten Sie die Ölpumpe aus CH5, ziehen Sie den mit der Klaue verbundene Schnellverschluss nach hinten ab.
Switch off the oil pump CH5, pull off the quick-release fastener connected to the claw to the rear.
.
BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL 22552
REMOVE CLAW INSTALL THE BUCKET
16