Werbung
Verfügbare Sprachen
Verfügbare Sprachen
USER NOTES
TO ADJUST THE STAND TO THE INSTRUMENT
Hold the telescopic shaft
6 Loosen the clamp,
7 slide the telescopic shaft upwards,
8 re-tighten the clamp,
9 hang the instrument on the hook
Hold the telescopic shaft
10 Loosen the clamping screw again,
11 let the telescopic shaft retract,
12 allow the instrument to rest
12
gently on the instrument
12
support cradle,
13 re-tighten the clamp
14 The mouthpiece holder is
14
behind the support hook
CONTROL, MAINTENANCE, CLEANING
- Be aware of the potential risks associated with maintenance and care (pinching, trapping).
- We recommend using a slightly damp cloth and a non-scouring cleaning agent.
FAULT FINDING (F) and REPAIR (R)
F: Stand wobbles
F: Instrument wobbles
TECHNICAL DATA / SPECIFICATIONS
Shaft sections, hook, struts, cradle - steel, black
Screws, rivets - steel, zinc-coated
Materials
Floor protectors, hook, cradle - TPE, black
Clamps, guides, grips - PA, black
Capacity
Tenor horn or baritone
Dimensions
Foot print diameter: max. 730 mm, height: 620-1000 mm (570-1070 mm)
Package size, weight
180 x 100 x 540 mm; 2.0 kg
Carton, weight
180 x 100 x 610 mm; 2.4 kg
All manuals and user guides at all-guides.com
R: Check ground, adjust base and tighten clamping knobs
B: Adjust telescopic shaft (see 7)
Werbung
