Werbung
Verfügbare Sprachen
Verfügbare Sprachen
149/2 Tenor Horn Stand
- Stable, robust and folds away to a small size, excellent for mobile use
- Suitable for the tenor horn or baritone
- Instrument hook and cradle are encased in a soft material to protect the instrument
- Integrated mouth piece holder
- Anti-twist protection on the shaft sections and instrument holder
- Height adjustment; continuous from 635-970 mm
- Tool-free assembly and disassembly
Thank you for choosing this product. These instructions contain information
about the assembly of the product and its use.
We suggest you keep the instructions in a safe place for later use.
SAFETY NOTES
- Take care when placing or removing the instrument
-
from the instrument cradle and hook.
- The stand is only suitable for use on level, sound ground.
- As the product can be folded away,
-
there is an inherent risk of pinching or trapping and
-
care is required when assembling, using or dismantling
- The high quality floor protectors are virtually free of plasticizers;
-
However, lay a non-slip mat under the base
-
to avoid leaving marks on sensitive floors (e.g. parquet).
ASSEMBLY INSTRUCTIONS
The 14920 Tenor horn stand is very easy to assemble.
All the components are pre-assembled, the stand
merely needs to be set up.
1 Remove stand and instrument support from the carton
2 Loosen the clamping knobs
3 Fold the legs open...
4 ...until the connecting struts are horizontal
5 Re-tighten the clamping knobs
To dismantle, simply reverse the instructions.
All manuals and user guides at all-guides.com
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14920-012-55 Rev.13 03-80-153-00 1/13
Werbung
