Inhaltsverzeichnis
Werbung
9. Ventilation holes
10. Cover
11. Reset button
12. Power socket
3.2.
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative
humidity should be less than 85%. Ensure good ventilation in the room in which
the device is being used. There should be at least 50 cm distance between each
side of the device and the wall or other objects.
Place the unit on a heat resistant basis!
The device should always be used when positioned on an even, stable, clean,
fireproof and dry surface, and be out of the reach of children and persons with
limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must
be properly grounded and correspond to the technical details on the product label.
Only use the device in a horizontal position. Do not shake the device.
Disassemble the device and all its components and clean them before the first use.
3.3.
1. Ground the device (the grounding terminal is located on the back of the
device).
2. Connect the power cord to a power outlet, plug the other end of the cord
into the power socket.
3. Turn on the device by setting the On / Off button to "I" . In models with two
heating plates, each of them has a separate control, i.e. On / Off button,
heating indicator, temperature and time control knobs.
4. Use the temperature control knob to set the preferred temperature for
baking waffles and wait for the device to heat up. The waffle maker
conditions is approx. 12 minutes to a temperature of 250 ℃.
automatically maintains the set temperature. The heating time under normal
Note: When used for the first time, the heating elements may emit a small
amount of smoke.
Preparing for use
Device use
Werbung
Inhaltsverzeichnis
