Verifying Installation - Lexmark T620 Installationsanweisungen

Verifying installation

Once the high-capacity output stacker has been installed, verify that it is
installed properly by printing a menu settings page. To print a menu settings
page:
1
Make sure the printer power is on and the Ready status message appears
on the display.
2
On the operator panel, press Menu> or <Menu to enter the menus.
3
Continue to press and release Menu> or <Menu until you see UTILITIES
MENU appear on the display.
4
Press Select to show the list of available menu items for the UTILITIES
MENU.
5
Press Menu> until Print Menus appears on the second line of the display.
6
Press Select. The message Printing Menu Settings appears until the
page prints, and then the printer returns to the Ready state.
Note: If you receive a message, such as:
201 Paper Jam
Remove Cartridge
refer to the User's Guide on the Publications CD for more
information.
7
Verify that the high-capacity output stacker you installed is listed on the
menu settings page under "Installed Features." If it does not appear on the
page, turn the printer off, unplug the power cord, and reinstall the option.
All manuals and user guides at all-guides.com
High-Capacity Output Stacker Installation Instructions
7