Troubleshooting - Omron Sonic style 458 Gebrauchsanweisung

HT-B458-E_A_M.book Page 7 Friday, June 12, 2009 9:45 AM

8. Troubleshooting

Problem
The oscillation of the The brush head has not
brush head is been properly mounted to
unstable. the main unit.
The product does not The battery level is too low.
run or the oscillation
of the brush head is
too slow.
The main unit and They may heat up slightly
charger heat up. during charging.
When the toothbrush The power plug is not
is placed into the connected with the power
charger, the charger outlet.
indicator does not
light up.
The product can only When you start using the toothbrush (just purchased or not used for
last for a short period extended period), or when the brush head stops oscillating during
even after it has been operation,
charged; the please continuously charge for at least 16 hours.
oscillation of the (Refer to Section 3.)
brush head is too
slow.
The product can only Verify if the charger still works. The rechargeable battery within the brush
last for a short period cannot be replaced. Please follow local regulations on environmental
even after it has been protection when disposing the battery.
continuously charged
for at least 16 hours;
the oscillation of the
brush head is too
slow.
Cause
Properly mount the brush head onto the
main unit. (Refer to Section 4.)
Charge with the battery charger.
(Refer to Section 3.)
This is not unusual, and does not affect
the service life of the product.
Confirm that it is correctly connected.
(Refer to Section 3.)
Correction
7
EN