Product Description; Installation And Connection - Oase ProMax MudDrain 25000 Inbetriebnahme

Product description

Overview
1 Handle
2 Stepped hose adapter
3 Reducing coupling, G1½ to G1¼
4 Connection, pressure side G2
5 Pump base
6 Float switch
7 Power connection cable
8 Fastening cable, 32.8 ft

The unit contains cast iron which is subject to a natural corrosion process. This does not
impair the function of the unit.

Installation and connection

Connecting the pressure hose
An optimum flow rate is achieved with a 2 inch hose diameter.
How to proceed:
 A
1. Adapt the stepped hose adapter to the hose diameter.
2. Screw the stepped hose adapter onto the connection on the pressure side.
3. Connect the pressure hose to the stepped hose adapter.
– Secure the pressure hose with a hose clip.
EN
POX0014
11