The Control Panel; Emptying Indicator - Cinderella COMFORT Produkthandbuch

3.6 THE CONTROL PANEL

The control panel is equipped with a combination of light, sound and display messages that will give the best
possible user experience. There are a number of light and sound combinations that will tell the user about the
status of the system. It is important that all users familiarize themselves thoroughly with these signals before
use. An overview of all the light and sound signals can be found in the troubleshooting table in section 5.1.
NOTE!
• A green light indicates that the toilet is connected to the power supply. When only the
green light is lit, the toilet is on standby and ready for use.
• A yellow light indicates an ongoing incineration process and will light constantly while
the toilet is in incineration mode
• A red light indicates interruption and will alert the user that the toilet is no longer
incinerating or on standby.
Standby
Incineration mode
System interrupted
Selecting your language
Hold down the "Select language" button for three seconds until "Language" is displayed on the first text line.
The current language will be displayed on the second line. Push the "Select language" button repeatedly until
the desired language is displayed. The new language will automatically be saved a few seconds after you have
chosen your language, and the toilet will resume operation.
Language select button

Emptying indicator

Your Cinderella Comfort will indicate when it is time to empty the ash container. The display will read ''EMPTY THE
ASH CONTAINER" and you will hear three short beeps when the toilet lid is opened. If not emptied within a short
period of time, the toilet will lock down. At this point the yellow and red lights are constantly lit and the display
will read ''TOILET LOCKED CONTAINER FULL". You will hear three short beeps every ten seconds until the ash
container is emptied.
15