INTEZZE ALPHA Bedienungsanleitung Seite 4

How to properly connect and disconnect the cable:
1) First, make sure you are connecting the left connector to the left in-ear
headphone and the right connector to the right in-ear headphone.
2) The correct cable routing is behind the ear on both in-ear headphones. You
can also determine the correct polarity of the pins as shown at the top left.
3) Align both pins of the connector exactly against the holes in the in-ear
headphone and push the connector into place. The connector should be
inserted correctly as far as it will go.
4) When disconnecting, always hold the connector as close to the in-ear
headphones as possible and pull in the direction of the pins to disconnect
the connector. Do not wiggle or twist!
EN