INTEZZE ALPHA Bedienungsanleitung Seite 3

EN
Detachable cable
The connectors connecting the in-ear headphones to the cable should be
handled gently. They are not designed for frequent disconnection and
connection. We recommend only disconnecting the cables when replacing the
cable with a new/different piece.
When disconnecting/connecting the cable, make sure that the L (left) and R
(right) in-ear headphones are properly connected to the corresponding L and R
connectors on the cable. Also pay attention to the correct polarity of the pins.
The cable must always point backwards behind the ear (see next chapter).
If you decide to fine-tune the in-ear headphone sound with your own cable,
always make sure in advance that its in-ear headphone jacks are compatible.
Never use excessive force when connecting the cable!