Technical Data; Before Starting The Equipment - EINHELL TE-MA 1500 Originalbetriebsanleitung

machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Mains voltage: ........................ 220-240 V ~ 50 Hz
Power input: ............................................ 1500 W
Rated speed: .......................................8500 min
Max. wheel diameter (rated capacity): .... 125 mm
Mounting hole: ...................................... 22.2 mm
Channel depth: .....................................5 - 30 mm
Channel width: .....................................8 - 30 mm
Mounting spindle thread: .............................. M14
Protection class: ...........................................II /
Weight: .......................................................4.9 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level ..................... 97,5 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ..................... 108,5 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
Anl_TC_MA_1500_SPK13.indb 15 Anl_TC_MA_1500_SPK13.indb 15
-1
= 7.824 m/s
2
h
2
- 15 -
GB
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Setting the groove depth (Fig. 1)
•
Slacken the locking screw (6).
•
Set the depth stop (7) to the desired depth.
•
Tighten the locking screw (6).
5.2 Fitting the dust extractor adapter (Fig. 3)
Caution! For health and safety reasons it is
imperative that you use a dust extractor. The
extractor socket is suitable for use on vacuum
extractor units (vacuum cleaners). The extractor
unit must be suitable for the extraction of fi ne
dust.
Connect a suitable vacuum cleaner, as shown in
Fig. 3, to the dust extraction connector.
02.08.2021 09:08:09 02.08.2021 09:08:09