Bellman & Symfon CARQ-BE1411 Benutzerhandbuch Seite 74

Testing
1 Ring the doorbell or intercom.
2 The LED on the Visit receiver lights up in green and the receiver starts to
sound, flash or vibrate (depending on the model). If it doesn't react, see
Troubleshooting.
1
141
Using electromagnetic detection
The door transmitter can be set to detect electromagnetic fields emitted by
electromechanical doorbells. Here is how it's done:
 Activating electromagnetic detection
2
 Deactivating electromagnetic detection
Changing the radio key
If you install multiple systems, you can set a
unique radio key for each system to avoid radio
interference. Move any radio key switch
the up=on position to change the radio key.
Note: All Visit products must be set to the same
radio key in order to operate as a group.
Move the 4th signal-switch to the
1
Up=On position.
Move the 4th signal-switch to the
Down=Off position.
1
2
to
2
142