LG GSLV91MCAD Bedienungsanleitung Seite 38

global_main.book.book Page 38 Friday, September 17, 2021 10:39 AM
SMART FUNCTIONS
38
NOTE
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP, you may fail to set up the network. Please
change it to other security protocols (WPA2 is
recommended) and register the product again.
Installing the LG ThinQ
Application
Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG ThinQ
application, allows the appliance to connect to a
home Wi-Fi network. The Wi-Fi indicator shows the
status of the appliance's network connection. The
Wi-Fi indicator illuminates when the appliance is
connected to the Wi-Fi network.
• Initial Appliance Registration
Run the LG ThinQ application and follow the
instructions in the application to register the
appliance.
• Re-registering the Appliance or Registering
Another User
Press and hold the Wi-Fi button for 3 seconds to
temporarily turn it off. Run the LG ThinQ
application and follow the instructions in the
application to register the appliance.
NOTE
• To disable the Wi-Fi function, press and hold the
Wi-Fi button for 3 seconds. The Wi-Fi indicator
will be turned off.
Wireless LAN Module
Specifications
Model
Frequency 2412 - 2472 MHz
Range
Output Power IEEE 802.11 b: 18.06 dBm
(Max.)
IEEE 802.11 g: 18.95 dBm
IEEE 802.11 n (HT20): 18.43
dBm
IEEE 802.11 n (HT40): 17.96
dBm
Wireless function S/W version: V 1.0
For consideration of the user, this device should be
installed and operated with a minimum distance of
20 cm between the device and the body.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses that have the
obligations to disclose source code, that is
contained in this product, and to access all referred
license terms, copyright notices and other relevant
documents please visit https://
opensource.lge.com.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com.
This offer is valid to anyone in receipt of this
information for a period of three years after our
last shipment of this product.
LCW-010