PURE Evoke Serie Bedienungsanleitung Seite 11

WPS setup
WPS encrypted networks are identified by '[WPS]' at the start of the Network name, and have two methods of
connection. Select one and follow the prompts. When using the network wizard an additional option to Skip
WPS is available.
Select one and follow the prompts:
• Push Button >
Your Evoke prompts you to press the connect button on the router. Then press the select control.
• Pin > (code number)
Your Evoke generates an 8-digit code number which you enter into the wireless router/access point.
• Skip WPS >
Enter key as for a standard encrypted network, above. For more information on setting up a WPS encrypted
network, see your WPS router's instructions.
On completion
Your Evoke connects to the selected network.
If connecting fails, your Evoke returns to a previous screen to try again. To exit the process use the Back button.
Note: Your Evoke remembers the last four wireless networks it has connected to, and automatically tries to
connect to whichever one of them it can find. You can see the list of registered networks through Menu >
System settings >Network > Network profile >From here you can delete unwanted networks by Select then
confirming delete Yes.
There are also other options for viewing and manually altering network settings from Menu > System settings >
Network.
Users experienced with networking may find these options useful for diagnosing and fixing network problems.