ultrasone iSAR Bedienungsanleitung Seite 25

USER GUIDE
4. Power and Bluetooth
The ULTRASONE ISAR headphones work with any Bluetooth
tablet, laptop, TV etc. and can be connected wirelessly.
Connect headphones via Bluetooth
Step 1:
Turn on the headphones.
Step 2:
For first use, please press and hold the Bluetooth
will hear the voice prompt „Bluetooth
Note
Next time you use the headphones, they will automatically connect to the last one connected device.
Step 3:
Go to your device's Bluetooth
Note
If the connection cannot be established successfully or other unexpected problems appear, turn off the
headphones and then turn them on again. Then go back into Bluetooth
Step 4:
Once connected, you will hear a voice prompt, „connected, " and the status indicator will turn green and flash
blue every five seconds.
lights up green and flashes blue
®
:
®
pairing on" and the Bluetooth
®
menu and select „ISAR".
®
ANC
status indicator
-enabled device, for example mobile phone,
®
button until the status indicator flashes red and blue. You
®
pairing mode is activated.
®
®
Bluetooth button
®
pairing mode.
24