Internal Components - Asus Barebone P Serie Installationsanleitung

Internal components

1. Front panel cover
. 5.5-inch optical drive and
3.5-inch hard disk drive cage
3. Power supply unit
NOTE: *Refer to the system User Guide for motherboard details.
Removing the cover
1. Remove the cover screws on the rear panel. Keep the screws for later use.
. Pull the cover toward the rear panel.
3. Lift the cover, then set it aside.
1
Removing the front panel cover
1. Locate the front
panel cover hooks,
then lift them until
they disengage from
the chasis.
. Swing the front panel
cover to the right,
remove it, and set it
aside.
3
4
5
6
4.
5.
6.
7.

1
Installation manual

1
7
PCI card riser bracket (connected
to the motherboard PCI slot)
ASUS motherboard*
DIMM sockets
CPU fan
R
3

3