Warranty Duration And Limits; Replacing The Inductor - AIT HDI 11K400/230 KB Gebrauchs- Und Wartungsanleitung

Use and maintenance manual

11.4 Warranty duration and limits

A product remains in warranty for one year from date of purchase.
The warranty does not apply to the following cases:
- an external cause (mechanical shock, lightening, sudden changes in voltage)
- damage incurred during transport or storing
- a product installed in a manner that does not comply with manufacturer specifications
- a product containing too much dust in inner parts
- a product exposed to rain or humidity
- a product which has been modified by the client
- deteriorations caused by ill use of equipment
- use of unsuitable accessories or consumables
- natural wear of different parts of equipment
- freezing caused by insufficient or unsuitable use of the coolant
The guarantee does not apply to normal wear of accessories or consumables (ferrite).
If the equipment is modified or repaired by unauthorised personnel, the warranty shall be void.
CAUTION: The inductor (Fig. 4) must not be bent or altered in shape in any way. If the induc-
tor is modified, the warranty shall be automatically rendered void.

12. Replacing the inductor

Inductor replacement should be performed only by authorised personnel and only
after cutting off power to the machine.
Wear protective gloves during maintenance and/or repairs.
Electrically isolate the machine by disconnecting it from the mains.
When replacing the inductor, verify that there are no significant liquid leaks from the
manipulator. If there are any significant leaks, top up liquid in the corresponding tank.
Tightening should not exceed 5Nm when fastening the inductor. Tighten
using a suitable torque wrench.